The Importance of Maintenance
- Snow Foam Lance (optional but highly recommended)
- High Pressure Washer (optional but highly recommended.
- 2 Buckets
- pH Neutral Car Wash Shampoo and Snow Foam Shampoo
- Grit Guards (optional but highly recommend)
- Wash Mitt
- Microfibre Drying Towels
- Drying Aids (Spray Wax or Quick Detailer)
Things to throw away because they are extremely harmful
- Sponges
- Chamois “Shammy”
Step 1: Preparation
- Dilute Snow Foam with water, it is usually 1:10. Sometimes some products will have different dilution so check first before you mixed it up.
- Fill up 2 Buckets with water and put 2-3 caps of shampoo in one of the buckets.
Step 2: Pre-Wash
- Apply Snow Foam with the snow foam lance and apply a nice and thick layer over the entire car. Let it sit for about 3 to 5 minutes. In the meantime, you can take some of the detailing brushes and thoroughly brush the grilles and crevices.
Step 3: Rinse
- High Pressure Rinse thoroughly over the whole car
Step 4: Wash
- Take your wash mitt, dip it into the shampoo mixed bucket. Wash a quarter of a panel each time. Start from the roof and work your way down. After each quarter of a panel, rinse the wash mitt in the plain water bucket and repeat the process above.
Step 5: Rinse
- High Pressure Rinse thoroughly over the whole car
Step 6: Drying your car
- Use your microfibre drying towel to dry over your car. Carry 2 to 3 Towels with you because usually a towel will get too wet after about 1/3 of the car.
Step 7: Final Touch
- Use a high quality spray wax or quick detailer, spray and wipe over the whole car, panels by panels.